i18 FIRING MODULE
THE FLAGSHIP MODULE
The IGNITE i18 is a compact, 18-cue firing module supporting both free-shoot manual and fully automated shows.
Enhance your experience with our IGNITE i18 module by exploring our range of optional accessories, including the Quickplug Cue Tester and Quickplug Breakout Boards.
| # CUES | 18 |
| BATTERY TYPE | LiPo Rechargeable + Charger |
| BATTERY LIFE | 20+ Hours |
| MAX CLIP ON IGNITERS (Per Cue, Directly Connected to Module) | 2 |
| MAX FIRING SPECS (Using Breakout Board) |
Clip-On Igniters |
| RANGE | 150-300ft+ / 50-100m+ |
REUSABLE AND EXPANDABLE
KEEP YOUR INVESTMENT
All IGNITE modules are reusable year after year and offer a lifetime warranty. If you need to shoot more fireworks, simply buy more modules.
LONG RANGE BLE 5.0
BE A SPECTATOR TO YOUR SHOW
IGNITE uses long-range BLE 5.0 powered by the Fanstel BT832XE BLE power-amplified transceiver. This is not your classic Bluetooth.
The i18 module has a minimum range of 50 to 100m+ (150 to 300ft+) with future expansion features to support longer range for challenging shoot site locations. It's important to note that this is the minimum range of our systems. It's common for phones and tablets to exceed 200m/600ft. Please watch our long-range video firing IGNITE from over 1,200 ft... To maximize range, raise it off the ground by at least one foot using a platform such as a 5-gallon bucket.
IGNITE also supports firing a show out of range by starting the show while in range, and instructing the modules to continue firing while out of range. Watch our Firing an Automated Show videos to learn more about this feature.
STANDARD LIPO BATTERY
POWER PACKED OUT OF THE GATE
With 20+ hours of operation, the i18 module uses a standard internal rechargeable LiPo battery with a USB charger included.
ILLUMINATED COLOR IDENTIFICATION
FEEL THE GLOW
When pairing an IGNITE module to your smart device, you assign a color for identification. You can select modules by color when firing your show manually or designing your show using our online IGNITE Show Designer software.
QUICKPLUG® IGNITER CONNECTORS
WORKS WITH CONSUMER SAFETY IGNITERS
The IGNITE i18 module uses industry-standard Quickplug® connectors and is designed for use with Clip-on Igniters.
ELEMENT RESISTANT DESIGN
FIREWORK WARRIOR
The IGNITE i18 module has an element-resistant design and can withstand sparks and other fireworks fallout. If you expect rain or other weather elements, we suggest covering the unit with something such as a 5-gallon bucket.
SIMPLE FIRMWARE UPDATES
FUTUREPROOF DESIGN
Any firmware updates to the IGNITE module for features or fixes are made available and performed directly from the app in seconds. No need for a USB or other software applications to perform updates.
LIFETIME WARRANTY
BUY IT FOR LIFE
IGNITE takes pride in product usability, construction, and ease-of-use. We stand behind every customer and every system we sell. All products include a standard lifetime warranty covering manufacturing defects. If something goes wrong that you didn’t cause, we’ll repair or replace it at no cost - with shipping coverage based on warranty period. Learn more.
QUICKPLUG 6-CUE TESTER
visually confirm ignition
The Quickplug 6-Cue Tester is an optional accessory for pyrotechnic enthusiasts, allowing the use of up to three testers with the IGNITE i18 module. Featuring six labeled blue LEDs for visual confirmation of cue firing, it simplifies setup and ensures a seamless pyrotechnic display. The LED also pulses to indicate active cue connection checking, providing peace of mind during your pyrotechnic endeavors.
PROTECTIVE CASES
While IGNITE doesn't directly offer protective cases for the i18 firing module, we've got you covered. You can either purchase a ready-made solution from a trusted partner or create your own custom case.
Purchase a Ready-Made Case
Great Lakes Mortar Racks offers a tailor-made case, specifically designed for IGNITE modules. This case is a convenient, ready-to-use option that provides reliable protection for your equipment.
Create Your Own Case
For those who enjoy a bit of DIY, creating your own protective case is straightforward. You'll need just three items:
- Armored Case External Antenna Cable
- Armored case, like the Pelican 1050 micro case
- 1/4" drill bit
Drill a hole (we recommend the top left corner for optimal cable reach) and install the Armored Case External Antenna Cable, using both the lock washer and locknut. Connect it to your i18, place it inside the case, and you’re set!