Clip-on igniters are designed for clipping onto the side of a Visco fuses. They function by channeling an electric current through a tungsten coil heating element, which then burns through any fuse lacquer coating, fiber exterior and into the powder core to ignite the fuse.
One advantage of clip-on igniters is that you can clip closer to the base of the firework to cause the firework to ignite earlier.
Installation of clip-on igniters is simple, yet important to follow the exact technique. Simply attach the clip to the desired fuse ensuring proper contact from the side, then plug the other end into the IGNITE firing module.
One-time use only, a 25 pack of 2 meter / 6.5 ft. length IGNITE clip-on igniters.
Qty | Per Pack | Per Igniter |
1 - 3 (25 - 75) | $20.49 | $0.82 |
4 - 9 (100 - 125) | $20.09 | $0.80 |
10 - 19 (250 - 475) | $19.68 | $0.79 |
20 - 39 (500 - 975) | $18.86 | $0.75 |
>40 (>1000) | $18.24 | $0.73 |
One-time use only, a 25 pack of 4 meter / 13.1 ft. length IGNITE clip-on igniters.
Qty | Per Pack | Per Igniter |
1 - 3 (25 - 75) | $29.49 | $1.18 |
4 - 9 (100 - 125) | $28.91 | $1.16 |
10 - 19 (250 - 475) | $28.32 | $1.13 |
20 - 39 (500 - 975) | $27.14 | $1.09 |
>40 (>1000) | $26.25 | $1.05 |
One-time use only, a 25 pack of 6 meter / 19.6 ft. length IGNITE clip-on igniters.
Qty | Per Pack | Per Igniter |
1 - 3 (25 - 75) | $37.49 | $1.50 |
4 - 9 (100 - 125) | $36.75 | $1.47 |
10 - 19 (250 - 475) | $36.00 | $1.44 |
20 - 39 (500 - 975) | $34.50 | $1.38 |
>40 (>1000) | $34.50 | $1.38 |
Breakout Boards are a convenient, re-usable solution for wiring multiple igniters to a single cue.
If you are using Clip-On Igniters, you can plug up to two igniters into the breakout board.
If you are using Fuse-Tube Igniters, you can plug up to five igniters into the breakout board, or use multiple breakout boards together for a maximum of 10 Fuse-Tube Igniters per cue.
Includes: