Elevate PyroA community for pyros, by pyros. Forums, shows, and pyros near you.For pyros, by pyrosTake a lookElevate PyroA community for pyros, by pyros. Forums, shows, and pyros near you.For pyros, by pyrosTake a look
Subscription Confirmed
Thank you. You'll continue to receive updates and exclusive content from IGNITE.
Have Questions or Feedback?
Our team is ready to assist. Don't hesitate to contact us with any inquiries or comments.
You have selected a Quickplug Harness for use with an IGNITE Breakout Board. For safe and effective operation, it's important to adhere to the maximum firing specifications.
Following these specifications helps ensure that all igniters fire as expected. Exceeding the recommended limits may lead to igniters not firing, especially in synchronized or complex firing setups.
The tables below outline the maximum number of igniters that can be fired per cue, when using a single Breakout Board and Quickplug Harness.
Note that in when triggered, each cue sends a continuous 2-second pulse. If multiple cues are triggered within this time frame, the overlapping pulses count toward the maximum firing specifications. For more information on pulse times and their impact on firing capacity, please see our Help Article.
| Quickplug Harness Length | 2M Clip-On | 4M Clip-On | 6M Clip-On |
|---|---|---|---|
| 1ft (0.3m) Quickplug Harness | 2 | 2 | 2 |
| 6.5ft (2m) Quickplug Harness | 2 | 2 | 2 |
| 19.5ft (6m) Quickplug Harness | 2 | 2 | 2 |
If you have any questions about maximum firing specifications, pulse times, or anything else, please contact us, we are happy to help.