IGNITE isn't just a firing system - it's a platform. These integrations allow you to build 3D shows with GLOW and synchronize with holiday lights with Light-O-Rama, giving you more ways to elevate your fireworks shows.
GLOW is a web-based 3D fireworks design platform offered by select retailers. It lets you build and preview your show online, then fire it using IGNITE.
Build your show on a retailer's GLOW page. Generate a 4-digit code and enter it into the IGNITE app or Designer to load your show instantly.
Light-O-Rama is a popular lighting control system. The IGNITE integration allows you to sync fireworks with lighting using SMPTE timecode.
Enable SMPTE on your audio soundtrack within IGNITE Show Designer. Use a splitter to send SMPTE audio to Light-O-Rama and music to your speakers. When you fire your show, both systems run in sync.
You have selected a Quickplug Harness for use with an IGNITE Breakout Board. For safe and effective operation, it's important to adhere to the maximum firing specifications.
Following these specifications helps ensure that all igniters fire as expected. Exceeding the recommended limits may lead to igniters not firing, especially in synchronized or complex firing setups.
The tables below outline the maximum number of igniters that can be fired per cue, when using a single Breakout Board and Quickplug Harness.
Note that in when triggered, each cue sends a continuous 2-second pulse. If multiple cues are triggered within this time frame, the overlapping pulses count toward the maximum firing specifications. For more information on pulse times and their impact on firing capacity, please see our Help Article.
| Quickplug Harness Length | 2M Clip-On | 4M Clip-On | 6M Clip-On |
|---|---|---|---|
| 1ft (0.3m) Quickplug Harness | 2 | 2 | 2 |
| 6.5ft (2m) Quickplug Harness | 2 | 2 | 2 |
| 19.5ft (6m) Quickplug Harness | 2 | 2 | 2 |
If you have any questions about maximum firing specifications, pulse times, or anything else, please contact us, we are happy to help.